2x Wideband for Sky Q™ 4 x Quad c/w Sky Compatible Bracket
Please note: for use with Sky Q STBs you must use the 2 designated wideband outputs.
Wideband Technical Specifications
- Input Frequency: 10.7 ~ 12.75 GHz
- Output Frequency: Vertical: 290 ~ 2340 MHz / Horizontal: 290 ~ 2340 MHz
- L.O. Frequencies: 10.41 GHz
- L.O. Stability: +/-0.5 MHz (max) @ Room Temp. +/-1 MHz (max) @ -40°C ~ +60°C
- L.O. Phase Noise: -50dBc/Hz @ 1kHz (max.) -75dBc/Hz @ 10kHz (max.) -100dBc/Hz @ 100kHz (max.)
- Noise Figure: 0.1 dB (typ.)
- Conversion Gain: 50 dB (min) / 60 dB (max)
- Gain Flatness @ 26MHz: +/-0.5dB (typ.)
- Gain Variation: 7dB (max.) @ full band
- Cross Polar Isolation: 25 dB (typ.)
- Image Rejection: 40 dB (min)
- Current Consumption: 0.85W (max.) (70mA @ +12V DC)
- Power Voltage: 9 - 19V DC
- Connector Type: 75Ω female F-connector
- Output Spurious: <-60dBm
- Operating Temp.: -40’C ~ +60’C
- RED Compliance: EN 303 372-1
Legacy Technical Specifications
- Input Frequency: low band: 10.7 ~ 11.7 GHz high band: 11.7 ~ 12.75 GHz
- Feedhorn - Linear: Optimised for offset dish
- Output Frequency Output 1, 2, 3, 4: low band: 950 ~ 1950 MHz / high band: 1100 ~ 2150 MHz
- Output 1,2,3,4 VSWR (950 - 2150 MHz): Ratio 2.0:1 (typ.), 2.5:1 (max.)
- L.O. Frequencies: 9.75 / 10.6 GHz
- L.O. Stability: 0.5 ~ 1.0 MHz
- L.O. Phase Noise: -55dBc/Hz @ 1kHz (max.) -75dBc/Hz @ 10kHz (max.) -90dBc/Hz @ 100kHz (max.)
- Conversion Gain: 56 ~ 63 dB @ 25ºC / 54 ~ 60 dB @ -40ºC ~ 60ºC
- Gain Flatness Over Full Band: 3 dB P-P (typ.), 5 dB P-P (typ.)
- Gain Flatness @ 26MHz: +/- 0.5 dB P-P (typ.)
- Gain Flatness @ 300MHz: +/- 4 dB P-P (typ.)
- 1.7GHz: -50 dB (typ.) -47 dB (max.)
- Noise Figure: 0.3 dB (typ.), 1.0 dB (max.)
- Cross Polar Isolation: 18 dB (min.), 20 dB (typ.)
- Image Rejection: 37 dB (min), 40 dB (typ.)
- Current Consumption: 120mA (typ.), 140mA (max.)
- Operating Voltage & Band Switching: Vertical 11.5 - 14.5 VDC / Horizontal 15.5 - 19 VDC / Low-Band 0 KHz / High-Band 18 - 26 KHz
- Connector Type: 75Ω female F-connector
- Operating Temp.: -40ºC ~ +60ºC
- RED Compliance: EN 303 372-1